Germany
Manufactured
to the standard of ANSI/EIA-310D-1992 (Rev.EIA-310C),
IEC60297-1, IEC60297-2, BS5954 Part 2, DIN 41494.
Modular Knock Down
in order to be delivered conveniently. VCD manual
displaying every step of assembly is provided.
Produced from Electro-Galvanize Sheet Steel
with thickness of 1.5 mm. Mounting Pole, Frame Structure and Base made of 2.0 mm. Electro-galvanize
Sheet Steel. Castor Base stand made of 3.0 mm. steel, 100% rust proof
protection.
Mounting Pole
were designed to be C-shape Angle in order to increase the
strength. Punching of square mounting hole 7.0 x 7.0 mm. on both flange.
They can be adjusted in/out freely to meet customer’s needs. Has some
number which obviously put it on the mounting pole position.
Front Door
is the steel frame with Acrylic 5.0 mm. thickness and the width
of acrylic is 38 cm. (the height is being influenced by the size of the rack)
Door edge is bore with gray dust rubber seal (3 fins). Security locks with
19″ Germany Master Key.
Rear Door
is the steel door with 34 x 23 cm. ventilation slot at the
bottomfollow standard IP 4X Inside the rear door has the T-frame 70 mm.
width mounted to strong the door from swinging. Door Edge is also bore
with Gray dust rubber seal (3 fins) with 19″ Germany Master Key which is
the same set as the front door.
Hinges
is 19″ Germany Export Rack products made of 3 pieces of high
strength PVC, rusty and without any interfering noise. Reversibility Front and
Rear Door by adjusting at one screw nut of hinge.
Side Panels
are steel with two handles of 19″ Germany Slide Latch on the
top part in order to easily removable, Security lock with 19″ Germany
Master Key.
Roof Cover
can be mounted with various type of Single, Dual and Triple
Fans and can also be changed to Vented Raised Roof Cover in option.
Base
has the same width and deep of cabinet to fully supportive to all the
weight. The bottom is three parts Plinth with slide shutter for cable entry
and gray sponge to protect any tree-passing by animals, any kind of fan can
be equipped there as well.
Pedestal
was equipped with the castor base and is adjustable; by all of the
4 Pedestal’s base made of black ABS and can be freely adjustable 180
degree to suit the slope and protect all effects from static and earth
leakage.
Castor
made of back Nylon Six with the diameter of 50 mm; equipped on
the 360 degree swivel that allow to be moving conveniently with capacity
the static load 100 Kg/castor.
New Shine Light Gray
Two-Tone color by ElectroStatic Powder Coating paint
Grounding
with color stripe green and yellow copper wire 2.5 mm.;
connecting between all removable part of Rack
Screw Set compose of Screws, Captive nuts, plastic Washer; by each were
coated with nickel and M6 thread system.
Load
rating 500 Kg.
Manufacturing
and Distribution by TIS/ISO 9001:2000 Company.
